GSO IEC 61755-3-10:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - non-angled, ferrule-less, bore alignment connectors
GSO IEC 61755-3-10:2021 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO IEC 61755-3-10:2021 Scope
IEC 61755-3-10: 2016 defines certain dimensional limits of a 125 mm diameter single mode silica fibre optical interface and an alignment bore to meet specific requirements for non-angled fibre-to-fibre interconnection as defined in IEC 61755-2-1. The silica fibre materials specified in this document are suitable for use in categories C, U, E and O as defined in IEC 61753-1.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R121:2007
OIML R 121:1996
Gulf Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 10360-10:2024
ISO 10360-10:2021
Gulf Standard
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers
GSO ISO 7626-5:2024
ISO 7626-5:2019
Gulf Standard
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
GSO IEC 62828-4:2024
IEC 62828-4:2020
Gulf Standard
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters